Related Manuals for Monte Carlo Fan Company 5ED56WAD Series
Summary of Contents for Monte Carlo Fan Company 5ED56WAD Series
- Page 1 Owner’s Manual Ceiling Fan Installation Instructions Total fan weight wirh light kit For 5ED56WAD Series Fans READ AND SAVE THESE INSTRUCTIONS Quality Ceiling fans...
- Page 2 Attach the mounting bracket using only the hardware supplied with the outlet box. To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control. If this unit is to be installed over a tub or shower , it must be marked as appropriate for the application.
- Page 3 Install the keeper. Carefully lift fan assembly onto mounting brack- et. Rotate fan so that the notch on the ball engages the ridge in the mounting bracket. This will allow hands-free wiring. For pullchain controls, follow diagram above.
- Page 4 Put plug from fan through hole in switch plate. Loosen 3 screw on light plate as shown. Install 3 x 40 watt candelabra bulbs. Bulbs not included. Install switch plate by placing over the 2 screws and twisting into place.
- Page 5 If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.
Need help?
Do you have a question about the 5ED56WAD Series and is the answer not in the manual?
Questions and answers