Steps
1. Connect the coin-cell battery to the coin-cell battery cable.
2. Adhere the coin-cell battery onto the RTC marking on the right I/O-board.
3. Connect the coin-cell battery cable to the connector on the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
20
After working inside your
Before working inside your
computer.
computer.