Rear-I/O Cover; Removing The Rear I/O-Cover - Dell Alienware m17 R2 Service Manual

Steps
1. Using the alignment posts, place the left speaker on the palm-rest assembly.
NOTE: Ensure that the alignment posts are threaded through the rubber grommets on the speaker.
2. Route the speaker cable through the routing guides on the palm-rest assembly.
3. Using the alignment posts, place the right speaker on the palm-rest assembly.
NOTE: Ensure that the alignment posts are threaded through the rubber grommets on the speaker.
4. Connect the speaker cable to the right I/O-board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Rear-I/O cover

Removing the rear I/O-cover

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
The following image indicates the location of the rear I/O-cover and provides a visual representation of the removal procedure.
22
After working inside your
Before working inside your
computer.
computer.