Dell Alienware m17 R2 Service Manual page 63

Table 6. System setup options—Advanced menu(continued)
Advanced
Auto OS Recovery Threshold
SupportAssist OS Recovery
Intel(R) Rapid Storage Technology
Non-RAID Physical Disks
Table 7. System setup options—Security menu
Security
Unlock Setup Status
Admin Password Status
System Password Status
HDD Password Status
Admin Password
System Password
HDD password
Password Change
Computrace
Firmware TPM
PPI Bypass for Clear Command
UEFI Capsule Firmware Updates
Control the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
Default: 2
Enable or disable SupportAssist OS recovery.
Default: Enabled
Displays the disk using the Intel(R) Rapid Storage Technology.
Displays if the setup status is unlocked.
Displays if the administrator password is clear or set.
Default: Not set
Displays if the system password is clear or set.
Default: Not set
Displays if the HDD password is clear or set.
Default: Not set
Enables you to set the administrator password. The
administrator password controls access to the system setup
utility.
Enables you to set the system password. The system password
controls access to the computer at boot.
Enables you to set, change or delete the hard-disk drive
password.
Enables you to permit or deny system password or HDD
password changes.
Default: Permitted
Enable or disable the BIOS module interface of the optional
Computrace Service from Absolute Software.
Default: Activate
Enables you to enable or disable the firmware TPM function.
Default: Enabled
Enables you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip
BIOS PPI user prompts when issuing the Clear command.
Changes to this setting take effect immediately.
Default: Enabled
Enable or disable BIOS updates through UEFI capsule update
packages.
Default: Enabled
63