Power-Adapter Port; Removing The Power-Adapter Port - Dell Alienware m17 R2 Service Manual

7. Follow the procedure in

Power-adapter port

Removing the power-adapter port

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 2230 solid-state
4. Remove the 2280 solid-state
5. Remove the rear I/O-cover.
6. Remove the battery.
7. Remove the system board.
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
50
After working inside your
Before working inside your
drive. (if applicable)
drive. (if applicable)
computer.
computer.