Amcrest IP2M-848EW/ User Manual page 94

Below is an explanation of the features listed in this menu:
o
Preset: Allows the user to add and delete preset options for PTZ functionality. To begin adding a preset to your
camera, click the Add button. To refresh the screen click Refresh, to delete a preset, press Delete or to remove all the
presets, click Remove All.
o
Tour: Allows the user to string multiple presets together. For more information on setting up tours, visit section 5.2
PTZ of this user manual.
o
PTZ Speed: Allows the user to adjust pan, tilt, and zoom speeds. There are 3 separate PTZ speeds for this function;
Low, Middle, and High.
o
Idle Motion: Allows the user to set intervals of idle time before the preset quits. The idle time can be set from 1 ~ 60
minutes.
o
PowerUp: Allows the user to set preset and tour options upon initial startup of the camera. The camera can be set to
Auto to automatically set upon startup.
o
Time Task: Allows the user to set scheduled periods for PTZ presets to occur. To set a schedule, click the Enable check
box and select the time task action from the Task Set menu. If you want the time task to automatically return to a
specific position in a certain period of time, enter the value in the AutoHome field. This option is set to default every
30 seconds, however, this can be adjusted from 5 ~ 3600 seconds. Once this value is set, click the Scheduled button:
94