Amcrest IP2M-848EW/ User Manual page 100

Below is an explanation of the fields on the SD Card settings tab:
•
Event Type: This dropdown box allows the user to select which SD card abnormality to set event triggers for. The 3
options are No SD Card, SD Card Error, and Capacity Warning.
•
Enable: This checkbox enables the SD Card abnormality trigger for the camera.
•
Relay Out: This checkbox allows the user to enable the camera to trigger an alarm when an SD Card abnormality is
detected.
•
Alarm Delay: This field specifies in seconds how long the delay between alarm activation and relay alarm activation
should be.
•
Send Email: This checkbox allows the user to enable the camera to send an email when an SD Card abnormality is
detected.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the
settings, click the Save button.
5.8.4.2. Network
This tab allows the user to set the camera's response to a Network related abnormality. Below is a screenshot of the
Network tab screen:
Below is an explanation of the fields on the Network settings tab:
•
Event Type: This dropdown box allows the user to select which Network abnormality to set event triggers for. The 2
options are Disconnection and IP Conflict.
•
Enable: This checkbox enables the Network abnormality trigger for the camera.
•
Record: This checkbox allows the user to enable the camera to record video when a network abnormality is detected.
•
Record Delay: This field specifies in seconds how long the delay between alarm activation and recording should be.
•
Relay Out: This checkbox allows the user to enable the camera to trigger an alarm when a network abnormality is
detected.
100