Table of Contents
Advertisement
Note: There may be slight differences in functionality due to the existence of different product series.
IMPORTANT:
Due to specific hardware limitations within your camera it is important to note that these devices will
not be able to automatically pan/tilt or pivot in either the app or via the web UI on a computer. For this reason, it is
imperative to make sure to mount the cameras properly and position them as efficiently as you can to the areas you
wish to monitor. All positioning actions to the camera will have to be performed manually.
2 Device Overview
The image below shows the structure of the camera:
The images below show the dimensions of the installation and positioning map. The measurements are in millimeters
(mm):
To access the reset button and to adjust the camera angle, use a Torx/Hex wrench to open the camera assembly by
removing the 3 screws.
For reference, a Torx/Hex screwdriver tip looks like this:
The factory reset and microSD card slot can be located on the motherboard of the camera. Below is a representation
of the location of these features:
5
Advertisement
Table of Contents
Need help?
Do you have a question about the IP2M-848EW/ and is the answer not in the manual?
Questions and answers