Fitting And Removal Of Base : Prolite Xub2792Qsu - Iiyama ProLite XUB2792QSU-B1 User Manual

FITTING AND REMOVAL OF BASE : ProLite XUB2792QSU

 Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Hold the monitor and push the Stand-Base.
Use 'thumb screw' provided to secure base to monitor column.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Remove 'thumb screw' to remove base from monitor column.
<Stopper>
Put the monitor on a fl at surface. Press the stopper at
the back of the stand while pushing the monitor from the
top. Careful attention is required as the monitor is sprung
loaded and the stand may expand quickly.
6 BEFORE YOU OPERATE THE MONITOR
Stand-Base
Thumb screw for Stand-Base fi xing
Stopper