Christie SUHD983-P Firmware Release Notes
  1. Manuals
  2. Brands
  3. Christie Manuals
  4. Monitor
  5. SUHD983-P
  6. Firmware release notes

Christie SUHD983-P Firmware Release Notes

Hide thumbs Also See for SUHD983-P:
Table of Contents

Advertisement

Quick Links

Download this manual
This document provides firmware update instructions and describes what is new in this firmware version for
the SUHD983-P.
Learn what has been updated in this release.

Scaler Firmware, v1.0.2.1

•
Added RS232 control command for setting OPS/HDMI4 EDID:
•
EDU: EDID UHD
•
EDF: EDID FHD
•
EDI: EDID information
•
Resolved the issue where the OPS displayed a black screen.
•
Added multi-window configuration in portrait mode.
•
Resolved the issue where there was white noise from the panel after a factory reset.

Ethernet Firmware, v11

•
Updated the web interface.
•
Moved the Multi-window page under Picture settings.
•
Added the Preset settings page.
•
Added the UHD or FHD OPS/HDMI4 EDID options.

System connection for uploading

1. Plug in a USB memory to the service terminal.
SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11
020-001868-01 Rev. 1 (11-2020)
Copyright
2020 Christie Digital Systems USA, Inc. All rights reserved.
©
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SUHD983-P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Christie SUHD983-P

Summary of Contents for Christie SUHD983-P

  • Page 1 Added the UHD or FHD OPS/HDMI4 EDID options. System connection for uploading 1. Plug in a USB memory to the service terminal. SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 020-001868-01 Rev. 1 (11-2020) Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved. ©...
  • Page 2 You cannot enter Factory-Menu when set to Multi-Windows mode. You must change Multi-Window mode to off to enter Factory-Menu. SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 020-001868-01 Rev. 1 (11-2020) Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved. ©...
  • Page 3 6. If the USB storage device is not compatible, a “Can’t Detect USB” message appears. 7. Ensure the filename is always be SUHD983P.bin regardless of the software version to upload correctly. SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 020-001868-01 Rev. 1 (11-2020) Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved. ©...
  • Page 4 IP address must be a different address than the display. IP address : 192.168.10.50 Subnet Mask : 255.255.255.0 SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 020-001868-01 Rev. 1 (11-2020) Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved. ©...
  • Page 5 The ping test checks the Ethernet connection. 1. Press Windows + R. 2. Type cmd and click OK. 3. Type ping –t 192.168.10.10. SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 020-001868-01 Rev. 1 (11-2020) Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved. ©...
  • Page 6 3. To display the current value, click Read. 4. To upgrade the Ethernet or Scaler firmware, go to the General settings page. SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 020-001868-01 Rev. 1 (11-2020) Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved. ©...
  • Page 7 Scaler firmware update time: about 8 minutes File name : SUHD983-P.bin For installation, setup, and user information, see the product documentation available on the Christie website. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: •...
  • Page 8 • Singapore: +65 6877-8737 • South Korea: +82 2 702 1601 • Christie Professional Services: +1-800-550-3061 or NOC@christiedigital.com SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 020-001868-01 Rev. 1 (11-2020) Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved. ©...

Table of Contents