Table of Contents
Advertisement
Export Search
Search an exported data from the external device or internal
DVD-ROM device.
If you want to use this function, you have to connect the external
device or insert the CD/DVD disc with exported data otherwise the
warning message will be displayed.
Check the export device before you proceed.
1. Use w/s button to select the [Export] icon then press ENTER.
2. Select the desired source device.
3. Select the [Search] icon then press ENTER.
The exported file list menu appears.
4. Select the exported file on the exported file list then press ad
(Play) button or click [Play] to start playback.
The picture is displayed on the main monitor.
5. Press STOP (Z) to stop playback and return to the exported file
list menu.
Smart Search
You can be searched the recorded data by specifying the motion
detection conditions.
1. Use w/s to select the [Smart] icon then press ENTER.
The smart search menu is displayed.
2. Select the desired source device.
3. Specify the date, Start, Duration, Channel and sensitivity options.
•
wsad: Moves to the options.
•
w/s: Changes the value at the current position.
•
ENTER: Selects option or confirms the setting.
4. Set the motion mask setting.
The area switches between active and inactive each time you
press ENTER. Click the one point and drag & drop the end point
to select the motion using the mouse. The active areas are
indicated in red.
5. Press SETUP/ESC to exit the mask setting.
6. Select [Search] then press ENTER.
The search result is displayed on the list.
Operation
47
4
Advertisement
Table of Contents
