Table of Contents
Advertisement
© Panduit Corp. 2013
USAGE
The CP-881/E is for fully automatic stripping of flexible PVC insulated cables and subsequent pressing
on of continuously molded insulated ferrules on reels.
It uses continuously molded ferrules complying with DIN 46228 Part 4, with cross-sections ranging from
#20 – #14 AWG (0,5 – 2,5mm
s) and simple changing of cross-sections (below 10 s), the CP-881/E is not only suitable for use in
workshops but also in complex cable production systems.
The following ferrules can be used by the CP-881/E:
Cross-section
2
AWG (mm
)
20 (0,5)
18 (0,75)
18 (1,0)
16 (1,5)
14 (2,5)
PA27004A01_03 ENG
OPERATION MANUAL
2
), with a stripping length of 5/16" (8mm). Due to the short cycle times (1.5
Length
In. / (mm)
5/16" (8)
5/16" (8)
5/16" (8)
5/16" (8)
5/16" (8)
Page: 9 of 28
DIN
Color Code
White
Grey
Red
Black
Blue
CP-881/E ENG
10-2013
Advertisement
Table of Contents
