Table of Contents
Advertisement
OPERATING INSTRUCTIONS (CONT.)
BMI Function
1. Make sure there is nothing on the weighing platform and the
display shows "0.0".
2. Follow weight measuring procedure. After obtaining the
patient's weight, and with the patient remaining on the scale,
press
.
BMI
3. The scale will prompt entry of the patient's height. Use
the arrow keys to enter the patient's height.
Note: When weighing in pounds, the height is displayed in
inches. When weighing in kilograms, the height is displayed in
centimeters.
4. Once height is keyed in, press
5. The display will show the patient's BMI.
Zero
6. Press
to return to the normal weighing mode.
(Clear)
Weighing a Seated Patient on the Optional Chair Attachment
1. Make sure there is nothing on the weighing platform and the
display shows "0.0".
2. Fold the seat attachment down into the open position. Assist
the patient onto the seat. The scale will begin to display the
patient's weight and the word "PROCESSING". Depending on
the movement of the patient on the scale, it may take several
seconds for the scale to lock onto the weight. The display will
show the patient's weight and the word "LOCKED" when
measuring is completed. The scale may have locked onto a
weight before the patient was comfortably seated, press
to ensure an accurate weight measurement.
3.
The weight may be held on the display by pressing
The scale will continue to display the patient's weight after you
assist the patient off of the scale and will remain on the display
until released or the scale is powered off. To release,
press
.
Hold/
Release
P/N UM2500KL_2500KG_E_REV20181128
.
Enter
Hold/
Release
19
Reweigh
.
Advertisement
Table of Contents
