Table of Contents
Advertisement
SET-UP INSTRUCTIONS (CONT.)
Setting Auto Zero Option
When a scale is set to zero, it creates a reference point for weights that are placed on it. There are
two approaches to how this can take place. This option allows the user to select whether the scale
will re-set itself to ZERO each time it is powered up or whether it will use the zero reading from the
last time it was zeroed.
"Enable" means the scale will zero itself when it is powered on and this may take a few seconds.
After each use, the scale will clear the weight of the patient and set itself back to the initial ZERO
level it found on start-up. Health o meter
Enable. Note: Hitting a key to wake the scale from sleep mode will not prompt the scale to zero.
"Disable" means the scale does not attempt to find a zero when powered on, rather it will use the
last zero setting it had from its most recent use. There will be no delay in using the scale if the
Auto Zero is disabled. Health o meter
selected, users should manually zero the scale before each weight measurement by
pressing
Zero
(Clear)
1. Press
Help
to access the Help menu options.
2. While in the Help menu, press
Press
to advance to the next menu.
3. While in the "Set Options" sub-menu, press
through the options until "Auto Zero on Power Up" is
highlighted in red.
4. Press
to change the "Auto Zero on Power Up" option.
Choose from Enable or Disable.
Note:
You must press
Setting Date and Time
1. Press
to access the Help menu options.
Help
2. While in the Help menu, press
Press
to advance to the next menu.
3.
Use
and
Note:
You must press
P/N UM2500KL_2500KG_E_REV20181128
®
. Users will see dashes appear on the screen as the scale is finding zero.
to select "Set Options".
Enter
to save your selection.
to set the time and date.
Enter
to save the information.
®
Professional recommends keeping this setting as
Professional recommends that if the Disable option is
to scroll
to select "Set Clock".
13
Advertisement
Table of Contents
