Table of Contents
Advertisement
H1157101-39,226HS,GBCN.fm Page 17 Wednesday, September 2, 2015 2:38 PM
Gear
There is a grease nipple on the gearbox. Use a grease
gun to top up with grease. This should be carried out after
approximately every 50 working hours. Use Husqvarna
special grease.
Pump in grease until clean grease emerges to the blades.
Cleaning and lubrication
Clean any resin and plant residue from the blades using
cleaning agent before and after using the machine.
Lubricate the blade bars with special grease before long
periods of storage.
MAINTENANCE
Adjusting the blade gap
•
Tighten the blade securing bolts.
•
Loosen the tightened blade securing bolts with a 1/2 -
3/4 turns.
•
Tighten the nuts.
•
Make sure that the upper and the lower blade moves
smoothly
–
English
17
Advertisement
Chapters
Table of Contents
