Using The Appliance; Understanding The Air Quality Light; Switching On And Off; Changing The Auto Mode Setting - Philips AC2887/90 Manual

4 Using the appliance
Understanding the air quality
light
Air quality light color
Blue
Blue-violet
Red-purple
Red
The air quality light automatically goes on
when the air purifier is switched on, and lights
up all colors in sequence. After approximately
30 seconds, the air quality sensors select the
color that corresponds to the surrounding air
quality of airborne particles.
Switching on and off
1
Put the plug of the appliance in the wall
outlet.
2
Touch to switch on the appliance
(fig.i).
» The appliance beeps.
» The appliance operates under the
general mode by default.
» After measuring the air quality for
a short time, the air quality sensor
automatically selects the color of the
air quality light.
» For AC2887, "
screen when the appliance is warming
up. After measuring the particle
matters in the air, the appliance goes
to auto mode with xx displayed on
the screen (fig. j).
6 EN
Air quality level
Good
Fair
Unhealthy
Very unhealthy
" displays on the
» For AC2882, after measuring the
particle matters in the air, the
appliance operates in auto mode with
displayed on the screen (fig.k).
3
Touch and hold for 3 seconds to switch
off the appliance.
Note
• If the air purifier stays connected to the
electrical outlet after turning OFF, the air
purifier will operate under the previous
settings when turned ON again.
Changing the Auto mode
setting
You can choose the General mode
( ), the Allergen mode (
Bacteria & Virus mode (
General mode
The specially designed general mode can
effectively remove airborne pollutants such as
pm2.5.
• Touch the Auto mode button
the Pollution mode (fig.k).
» Auto (A) and
screen.
Allergen mode
The specially designed allergen mode can
effectively remove common allergens such as
pollen and pet dander.
•
Touch the Auto mode button
the Allergen mode (fig.l).
» Auto (A) and
screen.
) and the
).
to select
display on the
to select
display on the