Filter Force Reset; Filter Type Change - Philips AC2887/90 Manual

1
Take out the expired air purification filter
according to the filter code displayed on
the screen, and gently put the expired filter
into the trash bin (fig.z).
Note
• Do not touch the pleated filter surface, or smell
the filters as they have collected pollutants from
the air.
2
Remove all packaging material of the new
filters (fig.c).
3
Place the new filters into the appliance
(fig.f).
4
Touch and hold the reset button
for 3 seconds to reset the filter lifetime
counter (fig.{).
Note
• Wash your hands after changing the filter.
Filter force reset
1
Touch and simultaneously for
3 seconds to enter the filter force reset
mode (fig.|).
» Code (A3) of the NanoProtect filter
HEPA Series 3 displays on the screen.
2
Touch and hold for 3 seconds to force
reset the filter lifetime of the NanoProtect
filter HEPA Series 3 (fig.{).
3
Code (C7) of the NanoProtect filter AC
displays on the screen after the lifetime of
the NanoProtect filter HEPA Series 3 has
been reset (fig.}).
4
Touch and hold for 3 seconds to force
reset the filter lifetime of the NanoProtect
filter AC and exit the filter force reset
mode (fig.~).
10 EN
Filter type change
1
Touch and simultaneously for
3 seconds to enter the filter type change
mode (fig.|).
» Code (A3) of the NanoProtect filter
HEPA Series 3 displays on the screen.
2
Touch to select the filter code of the
new filter you will use (fig.).
3
Touch and hold for 3 seconds to
confirm the filter code of the new filter
(fig.€).
Note
• After you have selected the filter code of the
new filter using the button, if you do not
touch any other buttons in 10 seconds, the
appliance will automatically confirm the filter
code of the new filter.
4
Code (C7) of the Nanoprotect filter AC
displays on the screen after the first filter
type has been changed (fig.}).
5
Touch to select the new filter code of
the second filter (fig.).
6
Touch and hold for 3 seconds to
confirm the filter code of the second filter
and exit the filter type change mode
(fig.‚).
Note
• After you have selected the filter code of the
new filter using the button, if you do not
touch any other buttons in 10 seconds, the
appliance will automatically confirm the filter
code of the new filter.