Table of Contents
Advertisement
14
Daily use
Meat programmes with weight input
If you set the weight of the meat, the appliance calculates the roasting time.
1. Use
The weight flashes.
2. While the weight flashes, use
The setting changes in steps of 0.1 kg (for POULTRY in steps of 0.2 kg).
The display shows the length of the programme. The time counts down.
If you do not change the weight in less than 5 seconds, the meat programme starts. To
change the weight after the programme starts, use
programme starts.
3. For POULTRY meat programme turn the food when you hear an acoustic signal and
the display shows TURN-OVER MEAT .
When the meat programme is completed, you will hear an acoustic signal.
Meat programmes with meat probe
When you install the meat probe, you can find more meat programmes in the OVEN FUNC-
TIONS menu.
1. Switch on the appliance and install the meat probe.
The display shows MEATPROBE and
2. Use
When the MEATPROBE programme is completed, you can hear an acoustic signal.
Use any button to switch off the acoustic signal.
3. Remove the meat probe.
WARNING!
The meat probe is very hot. There is a risk of burns when you remove the meat probe.
Options menu
RECIPE MENU
MEMORY MENU
CLEANING MENU
SETTINGS MENU
1. Use
2. Use
The menu status bar shows the position in the menu.
3. Use
Going back in the menu
Use the menu option BACK to go back to a higher menu.
Canceling a selection
Push and hold
or
to set the meat programme.
or
to set the MEATPROBE programme.
to open the Options menu.
or
to set the menu option.
to open the menu.
to cancel a setting procedure.
or
to set the weight of the meat.
in less than 2 minutes after the
flashes.
OPTIONS MENU
Advertisement
Table of Contents
