Philips MiniVac FC6141/61 Manual page 11

Problem
The appliance does
not work.
The vacuum cleaner
does not vacuum
properly.
Dust escapes from
the vacuum cleaner.
The vacuum cleaner
does not work
properly when the
hose, the brush tool
or the crevice tool is
attached.
Solution
Check the capacity of the car battery and check
the car cord connection.
If the appliance still does not work, take the
appliance to your dealer or a service centre
authorised by Philips for examination.
The dust compartment may not be attached
properly to the appliance. Attach the dust
compartment properly to the appliance.
The dust compartment may be full. Empty the
dust compartment.
The filter unit may be clogged. Clean the inner
filter and the outer filter (see chapter 'Cleaning').
The dust compartment may be full. Empty the
dust compartment.
The dust compartment may not be attached
properly to the appliance. Attach the dust
compartment properly to the appliance.
Perhaps the filter unit is not placed properly in
the dust compartment. Place the filter unit
properly in the dust compartment.
Check if the hose, the brush head or the crevice
tool is blocked. If this is the case, remove the
obstruction.
The dust compartment may be full. Empty the
dust compartment.
The filter unit may be clogged. Clean the inner
filter and the outer filter (see chapter 'Cleaning').
ENGLISH
11