Philips MiniVac FC6141/61 Manual page 10

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH
10
Replacing the inner filter
1
Remove the filter unit from the dust compartment. Turn the outer filter
anticlockwise (1) and remove it from the filter holder (2). (Fig. 14)
2
Gently turn the inner filter anticlockwise (1) and remove it from
the filter holder (2). Place a new inner filter on the filter holder (1)
and turn it clockwise to attach it (2). (Fig. 15)
3
Push the tip of the inner filter inwards. Place the outer filter on the
filter holder (1) and turn it clockwise to attach it (2). (Fig. 16)
4
Put the filter unit back into the dust compartment (Fig. 17).
Ordering accessories
To buy accessories or spare parts (such as filters and additional nozzles),
visit www.shop.philips.com/service or go to your Philips dealer.
You can also contact the Philips Consumer Care Centre in your country
(see the worldwide guarantee leaflet for contact details).
Warranty and support
If you need information or support, please visit www.philips.com/support
or read the international warranty leaflet.
Recycling
-
This symbol means that this product shall not be disposed of with
normal household waste (2012/19/EU) (Fig. 18).
-
Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
Troubleshooting
This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Centre in your country.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Minivac fc6141Minivac fc6141/01

Table of Contents