Troubleshooting; Specifications - Tripp Lite B127-1A1-WHD1 Owner's Manual

Troubleshooting

1. The Transmitter and Receiver unit will not connect wirelessly.
(1) Both the Transmitter and Receiver units need to be factory reset prior
to installation (see Factory Reset Instructions for more information).
(2) Ensure both units are close together when initially pairing. The
connection is successfully established when the orange Data Transmission
LED glows solid.
(3) Reconnect the HDMI cables.
2. The Data Transmission LED indicator blinks slowly on the
Transmitter unit, but there is no signal output on the display.
(1) Verify the source device is outputting an HDMI signal by connecting the
source device directly to your display.
(2) Ensure the HDMI cables you are using support 4K/30 Hz resolutions.
3. Video is flickering or not stable.
(1) Change the positions of the transmitter or receiver and make sure they
are within the specified operating distance.
(2) Check for any obstacles that may block the wireless signal from
passing.
(3) Restart the transmitter and receiver units.

Specifications

Maximum Supported Resolution 3840 x 2160 @ 30 Hz
HDMI Version
HDCP Version
Transmission Distance
Transmission Method
Operating Temperature Range
Storage Temperature Range
Relative Humidity
Material
TX & RX Dimensions (H x W x D) 3.11 x 2.13 x 1.80 in. / 79 x 54 x 46 mm
TX & RX Weight
19-06-126-9339AD.indb 6
1.4
2.2
98 ft. / 30 m
60 GHz Wireless
32°F to 104°F / 0°C to 40°C
-4°F to 158°F / -20°C to 70°C
0% to 90% RH, Non-Condensing
Aluminum
0.26 lb. / 0.12 kg
6
7/17/2019 11:58:49 AM