Table of Contents
Advertisement
Cleaning & Maintenance
Door Stop Adjustment
Your refrigerator is factory set at a 90
stop, locate the door stop on top of the door hinge. Remove the two screws and door stop. Rotate the door stop 180
the shorter end faces away from the door. Replace door stop and screws. For additional information on the door stop adjustment,
visit the product information tab for 7 Series Bottom Mount Refrigerators online at vikingrange.com.
Remove screws and door stop
Saving Energy
You can help your refrigerator use less electricity with these simple tips:
• Open the door as few times as possible. Think about what you need before you open the door. Get everything out at one time. Keep
food organized so you will not have to search for what you want. Close door as soon as food is removed.
• DO NOT overcrowd the unit so air movement is blocked.
• DO NOT set the unit to temperature colder than necessary.
Vacation Tips
When you will be gone from home a short time (less than four weeks), there is no need to shut off your refrigerator. However, be sure to:
• Use any perishables.
• Freeze other items.
• Activate vacation mode.
• Turn off icemaker.
If you will be away from home for a month or more, follow these guidelines:
• Remove all food.
• Turn the power disconnect switch to the off position.
• Clean the unit and door gaskets according to the "Cleaning and Maintenance" chart on page 12.
• Prop doors open with rubber or wood blocks so air can circulate inside. This will keep odor and mold from building up.
• Turn off icemaker and shut-off water supply to icemaker by lifting the ice maker arm. Refer to page 10.
o
degrees with the longer end of the door stop facing away from the door. To change to 105
Rotate 180
long end of door stop
o
degrees
15
o
door
o
degrees so that
Advertisement
Table of Contents
