How To Make Setting In The Quick Setup Mode - Fostex FR-2LE Owner's Manual

Field Memory Recorder (Chapter 5: Recording/playback)
FR-2LE

How to make setting in the quick setup mode

You can make setting in the quick setup mode by the procedure below.
MIC L
1) When the recorder is stopped, press the [MENU/ENTER] key while holding down the
[SHIFT] key.
The unit enters the quick setup mode and "
Home screen.
This shows that the setting item is "ALC (Auto Level Control)". In this condition,
pressing the [+] or [-] key switches the flashing item in the following order.
2) Use the [+] or [-] key to select the desired setting item and press the [MENU/ENTER] key.
The current setting of the selected item starts flashing and you can now select the
option.
For example, if you select "
default) starts flashing.
3) Use the [+] or [-] key to select the desired option and press the [MENU/ENTER] key.
The selected option is set, and "
To make setting of another item, repeat steps 2) and 3) above.
4) After you complete setting, press the [STOP/CANCEL] key to exit the quick setup mode.
See the following pages for details about each item.
56
SHIFT
LIGHT
FR-2LE FIELD MEMORY RECORDER
CONTRAST
PREV FILE
LOC
REWIND
STOP/CANCEL
ABS0
REC END
STOP/CANCEL
" and press the [MENU/ENTER] key, "
" now starts flashing.
MENU /
ENTER
QUICK SET
MENU /
ENTER
SHIFT QUICK SET
NEXT
LOCK MIC R
F FWD MARK
DEL MARK
PLAY
" of " " starts flashing on the
LOCK
MARK
DEL MARK
" (the