Other Connections; Connecting To A Pc; Connecting To The Remote Controller - Fostex FR-2LE Owner's Manual

Field Memory Recorder (Chapter 4: Basic connections)
FR-2LE

Connecting to a PC

The FR-2LE provides the [USB] connector which is used for directly connecting to a PC.
By connecting the FR-2LE to a PC via this connector, you can control the current memory
card of the FR-2LE from the PC and transfer audio files to the PC.
See "Chapter 6: Exporting audio file to a PC" starting from page 69 for details about
audio file export/import.
<Notes>
• To use the FR-2LE with a personal computer,
make the USB mode active using the "USB Device Mode" item on the "Setup" menu
in the MENU mode. See page 71 for details.
• A USB cable is not supplied with the FR-2LE. Purchase a commercially available
appropriate USB cable which conforms to the USB port standard.

Connecting to the remote controller

The FR-2LE is equipped with the [REMOTE] jack for connecting the remote controller
which is supplied with the unit.
Using the remote controller, you can enter record standby mode, start recording, or
mark cue points.
<Tip>
The supplied fixing belt for the remote controller can
be used as shown in the figure on the right. You can fix
it to a shoulder belt, an external microphone, etc.
Also you can fix a strap to the hole shown by an arrow
in the figure on the right.
52

Other Connections

ANALOG IN
L R
1 GND
2 HOT
3 COLD
12V
REMOTE
[REMOTE] jack
[USB] connector
POWER USB
HOLD
OFF
L
R
PHONES MONITOR OUT
Remote controller
MARK REC STBY
fixing belt