Newly Added "Ep-Ct1 Mode" Item In The "Parallel Setup" Menu Item - Fostex UR-2 Supplementary Manual

For version 1.20

Hide thumbs Also See for UR-2:

Newly added "EP-CT1 mode" item in the "Parallel setup" menu item

The newly added "EP-CT1 mode" item selects the mode of the instant start controller (available soon) between

"Normal" and "Instant". The instant start controller controls the UR-2 using parallel commands.

Depending on "EP-CT1 mode" item setting, you can remotely perform instant start in the MEMORY play mode or

perform transport controls (for playing back, recording and stopping, etc.). For details about how to use the remote

start controller, see the operation manual of the controller.

<Memo>:

"REMOTE SET" of the MENU mode. The screen below shows the default condition of

the "Parallel setup" screen.

For details about how to access the "Parallel setup" screen, see page 61 of the owner's

manual.

Model EP-CT1 Instant start controller (available soon)

(The illustration shown above may differ from actual product appearance.)

The "EP-CT1 mode" item is added to the "Parallel setup" menu item in the

"EP-CT1 mode" item newly

added with the upgraded soft-

ware.

Table of Contents