Specifications; Analog.audio.inputs/Outputs; Other.connectors; Peak.limiter - Fostex Dc-R302 Detailed Manual

Portable recorder
Hide thumbs Also See for Dc-R302:
Table of Contents

Advertisement

Analog.audio.inputs/outputs

(0 dBu=0 .775 Vrms、0 dBV=1 Vrms)
[Inputs]
[INPUT].connectors.(1.through.3)
Connectors: XLR-3-31 (female, pin 2=hot),
electronically balanced
Input level / impedance (switchable using the
[GAIN] switch)
[GAIN]
Nominal
switch position input level input level
H
−60 dBu
M
−55 dBu
L
−50 dBu
LINE
−10 dBu
[RTN.IN].connector
Connector: 3 .5 mm diameter stereo mini jack,
unbalanced
Nominal input level: -10 dBV
Maximum input level: +2 dBV
Input impedance: 10 kohms or more
[Outputs]
[OUTPUT].connectors.(LEFT,.RIGHT)
Connector: RCA jacks, unbalanced
Nominal output level: -10 dBV (at nominal input
level or -12 dBFS signal playback)
Maximum output level: +2 dBV (at 0 dBFS sig-
nal playback)
Applicable load impedance: 10 kohms or more
[MIC.OUT].connector
Connector: 3 .5 mm diameter 4-pole mini jack
[Stereo outputs]
Nominal output level: -50 dBV (at nominal input
level)
Maximum output level: -30 dBV
Applicable load impedance: 10 kohms or more
[Remote]
Open: 40 kohms / close: 2 kohms
[PHONES].connector
Connector: 3 .5 mm diameter stereo mini jack
Applicable load impedance: 8 ohms or more
Maximum output power: 50 mW + 50 mW (32-
ohm load, THD: 0 .1 % or less)

Specifications

Maximum
Input
impedance
−32 dBu 2 kohms or more
−27 dBu 2 kohms or more
−22 dBu 2 kohms or more
+10 dBu 10 kohms or more

Other.connectors

[REMOTE].connector
Connector: 2 .5 mm diameter 4-pole mini jack
[USB] connector
Connector: Mini B type
[DC-IN].connector.
Connector: DC inlet (center positive, 5 .5 mm
outer diameter x 2 .1 mm inner diameter)
Attack time: Approx . 0 .5 msec
Release time: Approx . 200 msec
Threshold: -1 dBFS

HPF.(High.Pass.Filter)

Cutoff frequency: 80 Hz or 200 Hz switchable
Slope: -6 dB/oct .

Performance

Frequency.response
[INPUT] (line input) to [OUTPUT]:
20 Hz to 20,000 kHz +/-1 dB (nominal level)
[INPUT] (line input) to [MIC OUT]:
20 Hz to 20,000 kHz +/-2 dB (nominal level)
[INPUT] (mic input) to [OUTPUT]:
40 Hz to 20,000 kHz +/-1 dB (nominal level)
[PHONES] output: 20 Hz to 20,000 kHz +/-3
dB (32 ohms load, 25 mW output power)
S/N.ratio.(LPF:.20.kHz ..A-weighted)
For line level input: 90 dB or more ([GAIN]
switch: LINE)
For mic level input: 55 dB or more ([GAIN]
switch: H, input: 150 ohms)
THD.(LPF:.20.kHz)
For line level input: 0 .01 % or less at 1 kHz
([GAIN] switch: LINE)
For mic level input: 0 .1 % or less at 1 kHz
([GAIN] switch: H)
Crosstalk.(adjacent.channels)
For line level input: -70 dB or less at 1 kHz
([GAIN] switch: LINE)
For mic level input: -70 dB or less at 1 kHz
([GAIN] switch: H)
29

Peak.limiter

Advertisement

Table of Contents
loading

Table of Contents