Advertisement
Quick Links
JZL6701
Leaflet No. 464013
rev00
Read through
ALL
instructions before commencing installation.
If you have any questions about this product or issues with installation
STOP
contact the customer services helpline before returning this product to
the store. See jl.avfgroup.com/p/jzl6701 for more information.
70"
CUSTOMER SERVICES HELP LINE NUMBER:
121lbs
01952 670009
178cm
55kg
AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7YE, England
Advertisement
Related Manuals for AVF JZL6701
Summary of Contents for AVF JZL6701
- Page 1 If you have any questions about this product or issues with installation STOP contact the customer services helpline before returning this product to the store. See jl.avfgroup.com/p/jzl6701 for more information. 70" CUSTOMER SERVICES HELP LINE NUMBER: 121lbs 01952 670009 178cm 55kg AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7YE, England...
- Page 2 Assembly Overview Fit the TV Brackets Fit the Wall Bracket Connect the TV Tilt (if required)
- Page 3 It is the responsibility of the installer to ensure that the mounting wall is of a suitable standard and void of any services (eg gas, electricity, water etc). AVF accept no responsibility for any damage or loss caused by installing this product in a sub standard wall.
-
Page 4: Tools Recommended
Tools Recommended Stud Finder Ø10mm (25/64") Ø3mm (1/8") Masonry Wood Boxed Parts... - Page 5 TV Screws, Reducers and Spacers...
- Page 6 Measure the TV fixing holes Width and Height TV Fixing Holes 100 - 600mm 100 - 400mm If width X is greater than 600mm or height Y greater than 400mm STOP installation now and contact the customer help line You are provided with 4 diameters of TV fixing screws, M4, M5, M6 and M8.
- Page 7 Preparing the TV Brackets To ensure maximum tilt is possible after installation you will need to ensure that your TV does not clash with the wall. No Clash Clash Bottom Bottom If a clash is observed you will need to use adaptors C to position the TV Brackets B closer to the bottom of the TV to achieve maximum tilt.
- Page 8 Fitting the TV Brackets No Spacers Spacer For Tvs with flat/unobstructed back For Tvs with irregular/obstructed back WARNING After completing step 3 you will have fittings left over, please keep for future reference...
- Page 9 Screw diameter dependant If required Fixings shown are valid with or without adaptors C If required Attach the bracket to the back of your TV using suitable screw, reducer and spacer combinations.
- Page 12 Connecting the TV Attaching TV Levelling Adjust tilt tension if required. Equally tighten nuts to suit.
Need help?
Do you have a question about the JZL6701 and is the answer not in the manual?
Questions and answers