Table of Contents
Advertisement
- Carry out the power supplly connection in accordance with the national electric
code, ANSI/NFPA 70-1999.
5. Insert the wires into the box, then close the box cover, securing it using the screws
that were previously removed.
The appliance must be installed at a mini-
mum height of 27" from an electric cooker
stove, or 32" from gas or combined cooker
stoves. If a connection ductwork composed
of two parts is used, the upper part must
be placed outside the lower part. Do not
connect the range hood exhaust duct air
to the same duct air used to exhaust hot
air or fumes from other appliances other
than electrical. Before proceeding with
the assembly operations, remove the anti-
grease filter(s) (Fig.16) so that the unit is
easier to handle.
Fig.16
3. CONNECT THE DUCTWORK:
�����������������
���
- 17 -
Advertisement
Table of Contents
