Table of Contents
Advertisement
Quick Links
NEED HELP?
Call our ventilation experts toll free al 800-966-8300
AVEZ-VOUS BESOIN D'AIDE ?
Contactez nos experts au numéro gratuit 800-966-8300
¿NECESITA AYUDA?
Póngase en contacto con nuestros expertos a través del número gratis 800-966-8300
RANGE HOOD - User instructions
USA
HOTTE DE CUISINE - Notice d'utilisation
F
CAMPANA EXTRACTORA - Manual de utilización
E
XOMI36G
XOMI42G
Advertisement
Table of Contents
Related Manuals for Xo XOMI42G
Summary of Contents for Xo XOMI42G
- Page 1 XOMI36G XOMI42G NEED HELP? Call our ventilation experts toll free al 800-966-8300 AVEZ-VOUS BESOIN D’AIDE ? Contactez nos experts au numéro gratuit 800-966-8300 ¿NECESITA AYUDA? Póngase en contacto con nuestros expertos a través del número gratis 800-966-8300 RANGE HOOD - User instructions HOTTE DE CUISINE - Notice d’utilisation...
- Page 2 The warranty is extended to the original purchaser for products purchased for ordinary home use in North America. Should you require service for your XO product call a product service specialist at 800.966.8300 What is not covered Improper Installation.
- Page 3 ENGLISH IMPORTANT SAFETY INSTRUCTIONS FOR RESIDENTIAL USE ONLY READ AND SAVE THESE INSTRUCTIONS PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING. IMPORTANT: Save these Instructions for the Local Electrical Inspectors use. INSTALLER: Please leave these Instructions with this unit for the owner. OWNER: Please retain these instructions for future reference.
-
Page 4: Installation Instructions
Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambè). C. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. D. Use proper pan size. Always use cookware appropriate for the size of the surface element. E. Keep fan, filters and grease laden surface clean. F. - Page 5 D. Ducted fans must always be vented to the outdoors. E. This unit must be grounded. WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. WARNING - UNDER CERTAIN CIRCUMSTANCES DOMESTIC APPLIANCES MAY BE DANGEROUS. A. Do not check filters with hood working. B.
-
Page 6: Duct Fittings
DUCT FITTINGS: Equivalent Total Duct Quantity This Hood Must Use an Dimensions: Number Equivalent Piece: Used: Length*: Length: 6" Round Duct. It Can Transition to 3-1/4" x 1 ft. (per foot Round, straight 10" or 3-1/4" x 12" Duct. lenhgth) 3-1/4"... -
Page 7: Install The Ductwork
WARNING FIRE HAZARD NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside, unless using the recirculating option. Use single wall rigid Metal ductwork only. Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct Tape. - Page 8 PRODUCT DIMENSIONS AND CLEARANCE XOMI36G - XOMI42G: › Front of hood › Side of hood ��������� �������� › Top of hood › Mounting height and clearance: ����������������� ��������� ��� - 8 -...
-
Page 9: Installation
INSTALLATION INSTRUCTIONS INSTALLATION - VENTED TO THE OUTSIDE 1. INSTALLATION: � Remove the structure from the packa- ging and remove the 2 screws A to sepa- ratethe upper part from the lower part (Fig.1). - Position hole template on the ceiling paying attention that the arrow is posi- tioned on the same side as the appliance controls (Fig.2). - Page 10 structure B (Fig.4). Adjust the height by referring to the amounts indicated in (Fig.5) and block � it usingthe 8 screws G that are supplied (Fig.6). - Fix the flexible pipe to the prepared air evacuation hole (Fig.7). - Take the upper chimney piece and fix it to the structure using the 2 screws A (Fig.8).
- Page 11 � Fig.7 Fig.8 � � � � � � � �������� � � � � � Fig.9 - 11 -...
- Page 12 the structure paying attention that the previously unscrewed screws O, hook into the slots in the lower part as indi- cated in (Fig.9B). Drive in the 3 screws � N (supplied)and tighten the 2 screws O (Fig.9B). - Fix the air evacuation pipe H (not supplied) onto the connection flange F (Fig.10).
- Page 13 to the hood body with screws, remove the anti-grease filters from the hood by acting on the relevant handles (Fig.13). Then screw the lower chimney piece pipe to the inside of the hood, using screws P (Fig.12). Relocate the filters in their seat. IMPORTANT - The range hood must be secured to wall studs or use drywall anchors capable of supporting 75 lbs.
-
Page 14: Power Supply
POWER SUPPLY: IMPORTANT – (Please read carefully) WARNING: FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED. Remove house fuse or open circuit breaker before beginning installation. Do not use an extension cord or adapter plug with this appliance. Follow National electrical codes or prevailing local codes and ordinances. -
Page 15: Connect Electrical
2. CONNECT ELECTRICAL: WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PER- SONS, OBSERVE THE FOLLOWING: Before making electrical connections to power supply, the electrical box must be secured in place as indicated in Fig.14. Before installing the appliance fix the electrical box as indicated in Fig.14. - Page 16 • Power Supply Connection: For connection to the power supply refer to the following Fig.15: 1. Remove the power supply cover by undoing the (2) screws (Fig.15A). 2. Break through the hole on the box cover. 3. Secure the power supply conduit to the cover. 4.
- Page 17 - Carry out the power supplly connection in accordance with the national electric code, ANSI/NFPA 70-1999. 5. Insert the wires into the box, then close the box cover, securing it using the screws that were previously removed. The appliance must be installed at a mini- mum height of 27"...
- Page 18 DUCTLESS RECIRCULATING OPTION: � � � CARBON FILTER KIT XORFK01: The kit includes an air diverter A, 1 screw B and 2 rect- angular filters C. ��� � ��� � � � � Fig.1: Put together the two parts of the air de- Fig.2: To remove the two screws viator as shown in picture no 3.1.
- Page 19 � � � � � � � � 6" ROUND FLEXIBLE METAL DUCT PIPE NOT INCLUDED Fig.3: To fix the air diverter A on the support’s Fig.4: To take the upper chimeny F bracket using the screw B as it is shown in and to fix it to the structure using the the figure.
- Page 20 � � � � Fig.7: Remove the aluminum panels Fig.8: The charcoal filters C must be fit- by pulling the lever 1 out and pushing ted in the ducting unit located inside the downwards 2. hood. � � � � Fig.9: Put the aluminum panels back in place (Fig.7).
- Page 21 • If the apparatus is equipped with the following controls luminous: A = LIGHT B = OFF C = SPEED I D = SPEED II E = SPEED III F = AUTOMATIC STOP TIMER - 15 minutes � � � � � � • If your appliance does not have the INTENSIVE speed function, press key E for two seconds and it will be activated for 10 minutes after which it will return to the...
-
Page 22: Maintenance
MAINTENANCE • We recommend that the cooker hood is switched on before any food is cooked. We also recommend that the appliance is left running for 15 minutes after the food is cooked, in order to thoroughly eliminate all contaminated air. The ef- fective performance of the cooker hood depends on constant maintenance;... - Page 23 - DO NOT allow deposit to remain for long periods of time. - DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust. - DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods.
- Page 24 FUSE • The halogen lamps circuit is controlled by a fuse 5x20 mm, 125V 5A. In case of necessity it can be replaced only by spe- cialized personnel. • Replacing halogen light bulbs: To replace the halogen light bulbs B, remove the glass panel C using a lever action on the relevant cracks.
- Page 25 XOMI36G - XOMI42G: ��� �� ��� �� ��� �� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� �� ��� ��� ��� ��� ��� �� ��� ��� �� ��� �� - 25 -...
-
Page 26: Options And Accessories
OPTIONS AND ACCESSORIES: Model XORFK01 - Ductless Recirculating Filter Kit. Model XOEDCMI - Duct Cover Extension. This accessory is available for installation with ceiling heights above 9 ft to 10 ft. - 26 -... -
Page 27: Installation Preparation
INSTALLATION PREPARATION: Check installation hardware: Locate the hardware package packed with the hood and check contents. TYPE DESCRIPTION N° 1/8" x 6/16" 3/16" x 5/16" 2-piece decorative duct cover Aluminum filters (dimension shown for reference only) �������� ��������� - 27 -... - Page 28 XOMI Spec Sheet Model: XOMI36G - XOMI42G Sizes: 36"- 42" Depth: 23-5/8" Features and Benefits: - 600 CFM high velocity blower optimally removes Smoke, Grease and Odors. - 3+1 speed electronic illuminated controls. - Four 20W Halogen Lights - Provide brilliant illumination over the cooking surface.