Table of Contents
Advertisement
the structure paying attention that the
previously unscrewed screws O, hook
into the slots in the lower part as indi-
cated in (Fig.9B). Drive in the 3 screws
N (supplied)and tighten the 2 screws O
(Fig.9B).
- Fix the air evacuation pipe H (not
supplied) onto the connection flange F
(Fig.10).
- Remove adhesive tape L and rest the
lower chimney piece above the cooker
hood (Fig.11).
- If the cooker hood is supplied with a
lower chimney piece that must be fixed
Fig.11
�
�
Fig.10
Fig.12
Fig.13
- 12 -
�
�
Advertisement
Table of Contents
