Final Check Lists - Blodgett BCT Installation Operation & Maintenance

Table of Contents

Advertisement

Installation

Final Check Lists

WARNING!!
Final check list must be performed by a quali-
fied installer only.
OVEN EXTERIOR
1. Check that the oven has not been damaged in transit
(dents, scratches, etc.)
2. Check/adjust the height and check that the oven is
placed level (horizontally)
3. Check/adjust oven door
CONNECTIONS
1. Check for correct water connection
2. Turn on water supply
3. Check for leaks
4. Turn off water supply
5. Check and clean dirt filter
6. Turn on water supply again
7. Check hand shower
8. Check for correct electrical connection
9. Check for correct gas connection (if applicable)
10. Check connection to drip tray
11. Check for correct mounting of drip tray
12. Check for correct fall of hose from drip tray, and check
for leaks
13. Check for correct exhaust and drain connection
14. Clean the oven
15. Apply steel oil
OVEN INTERIOR
1. Check that filter housing is mounted correctly
2. Check interior light
3. Clean the oven
CONTROL
1. Check and adjust, if necessary, each of the preset
values
2. Heat up the oven at 480°F (249°C) for approximately
5 minutes.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

BlctBlct-62-62gBlct-6-10eBct-62-62eBct-62-102eBlct-62g

Table of Contents