Descaling The Machine; Descaling Procedure; Preparation - Philips HD8652/59 Manual

Descaling the machine

Descaling procedure

2 Remove the brew group and rinse it under a lukewarm tap as described
in section 'Weekly cleaning of the brew group'.
3 Apply a thin layer of grease around the shaft in the bottom of the brew
group.
4 Apply a thin layer of grease to the rails on both sides (see figure).
5 Insert the brew group as described in section 'Weekly cleaning of the
brew group'.
You can use the grease tube multiple times.
Scale builds up inside the machine during use. It is essential to descale the
machine when the orange descaling light lights up continuously. Only use
the special Philips Saeco descaling solution to descale the machine. The
Philips Saeco descaling solution is designed to ensure optimal performance
of the machine. You can buy the Philips Saeco descaling solution in the
online shop at www.shop.philips.com/service.
Note:The use of other descaling products may cause damage to the
machine and leave residues in the water.
Warning: Never drink the water with descaling mixture that you
pour into the water tank or any water with residues that comes
out of the machine during the descaling procedure.
Note: For more on-line support please visit our dedicated descaling page:
www.philips.com/descale.
The descaling procedure lasts approximately 30 minutes and consists of a
descaling cycle and a rinsing cycle.

Preparation

1 Switch off the machine.
Warning: If you do not switch off the machine, you cannot enter the
descaling
English
21