Descaling The Machine; Descaling Procedure; Preparation - Philips HD8650/06 Manual

ENGLISH
18
4 Apply some lubricant to both sides of the part shown in
the illustration.
5 Follow steps 7 to 11 in section 'Cleaning the brewing unit' to
place the brewing unit and the coffee grounds container back
into the machine.

Descaling the machine

Scale builds up inside the machine during use. It is essential to descale the
machine when the orange descaling light lights up continuously. Only use
the special Saeco descaling solution to descale the machine. The Saeco
descaling solution is designed to ensure optimal performance of the
machine. You can buy the Saeco descaling solution in the online shop at
www.shop.philips.com/service.
Note: The use of other descaling products may cause damage to the machine
and leave residues in the water.
Never drink the water with descaling mixture that you pour into the
water tank or any water with residues that comes out of the machine
during the descaling procedure.

Descaling procedure

The descaling procedure lasts 30 minutes and consists of a descaling cycle
and a rinsing cycle. When the orange descaling light lights up continuously,
you need to descale the machine.
Note: Do not remove the brewing unit during the descaling procedure.

Preparation

1 Switch off the machine.
If you do not switch off the machine, you cannot enter the descaling cycle.
2 Empty the drip tray and place it back.
3 Empty the water tank and remove the Intenza+ water filter (if present).
Pour the entire bottle of descaling solution into the water tank.
4 Add water to the descaling solution in the water tank up to
the MAX indication.