Descaling Cycle; Rinsing Cycle - Philips HD8652/59 Manual

English
22
5 sec
2 Empty the drip tray and place it back. Remove the automatic milk frother
(if present).
3 Empty the water tank and remove the Intenza+ water filter (if present).
Pour the entire bottle of the Philips/Saeco descaling solution into the
water tank.
4 Add water to the descaling solution in the water tank up to the MAX
indication.
5 Make sure the control dial is set to the coffee bean icon.
6 Place a bowl under the hot water/steam wand and coffee dispensing
spout.

Descaling cycle

1 Press the espresso button and cappuccino button simultaneously for
approximately 5 seconds.
-
The orange descaling light flashes slowly during the entire descaling
cycle.
2 Turn the control dial to the hot water icon and brew hot water. Let hot
water flow out of the hot water/steam wand for 10 seconds.
3 Turn the control dial back to the single bean icon.Wait approximately 1
minute to let the descaling solution act.
4 Press the espresso button to brew a cup of espresso.Wait approximately
1 minute to let the descaling solution act.
Note: During the descaling process, the coffee grinding function does not
work.If you press the espresso button, only water will flow out of the
machine.
5 Repeat steps 2 to 4 until the 'water tank empty' light lights up
continuously.

Rinsing cycle

1 Remove the water tank from the machine and rinse it.
2 Fill the water tank with fresh tap water up to the MAX indication and slide
the water tank back into the machine.
3 Empty the big cup and place it back onto the drip tray under the hot
water/steam wand.
4 Press the espresso button and brew a cup of espresso. Repeat this twice.