Fuels - Vermont Castings Signature VCS5008 Series User Manual

PROPANE GAS FUEL
WARNING
Never use Natural Gas in a Grill that has
been configured to burn Propane Gas, (and
never use Propane Gas in a Grill that has
been configured to use Natural Gas) to
avoid possible bodily injury. Always consult
the Rating Label on the back of the Grill to
confirm that it has been configured to burn
Propane Gas.
Always install the pressure regulator and
Type 1 propane gas supply coupling and
hose that has been provided with your
Propane Grill, as pictured in Figure 2.
•
Always install a standard 20 lb. propane cylinder
that has been equipped with a Type I valve outlet
as shown in Figure 3, and that is 12" in diameter
and 18" in height. Always use a propane cylinder
that has been constructed and marked in confor-
mance with either the specifications for LP Gas
Cylinders of the U.S. Department of Transporta-
tion or the specifications in the National Standard
of Canada, CAN/CSA-B339, Cylinder, Spheres
and Tube for Transportation of Dangerous Goods,
as applicable.
•
Always confirm that your propane cylinder is
equipped with a shutoff valve terminating in a Type I propane cylinder
valve outlet connection, and that it has been provided with a collar to
protect the cylinder valve.
•
Never install a propane cylinder in this Grill unless it is equipped with a
listed Overfill Protection Device (OPD).
•
Always have a new propane cylinder properly purged of air by your certi-
fied propane gas dealer. Since a new cylinder is initially filled with air,
the air must first be purged before it is filled with propane.
•
Always visually inspect the gas supply line for fraying, cracking or rodent
damage before each use of this Grill and, if necessary, install a replace-
ment hose and regulator obtained from the manufacturer prior to light-
ing this Grill.
• Always
place a dust cap on the cylinder valve outlet whenever the
cylinder is not in use and always install the dust cap that was provided
with the cylinder valve. The use of an incorrect dust cap could result in
leakage of propane.
Check hose for breaks or
wear before each use.
Type 1 Connector
Regulator
Check hose for breaks or wear
before each use.
����
���� ���������
����
Type 1 Connector
����
����� ������� ����
�����
Page 2
To Main Burner
Manifold
To Side
Burner Valve
To Main Burner
Manifold
Figure 2a
Quick Connect for
Optional Side Burner of
Built-in Models
Regulator
Figure 3
Shutoff Valve
Collar
����
�� ����
����
Safety
Figure 2
B124
B232
B125
50004581