Fuels - Vermont Castings VC series User Manual

PrOPane Gas FUel
WarnInG
Never use Natural Gas in a Grill that has been configured to burn Propane Gas to avoid possible bodily
injury. Always consult the Rating Label on the back of the Grill to confirm that it has been configured to
burn Propane Gas.
Always install the pressure regulator and Type 1 propane gas supply coupling and hose that has been
provided with your Propane Grill, as pictured in Figure 2.
•
Always install a standard 20 lb. propane cyl-
inder that has been equipped with a Type I
valve outlet as shown in Figure 3, and that is
12" in diameter and 18" in height. Always use
a propane cylinder that has been constructed
and marked in conformance with either the
specifications for LP Gas Cylinders of the U.S.
Department of Transportation or the specifi-
cations in the National Standard of Canada,
CAN/CSA-B339, Cylinder, Spheres and Tube
for Transportation of Dangerous Goods, as
applicable.
•
Always confirm that your propane cylinder
is equipped with a shutoff valve terminating in a Type I propane
cylinder valve outlet connection, and that it has been provided
with a collar to protect the cylinder valve.
•
Never install a propane cylinder in this Grill unless it is equipped
with a listed Overfill Protection Device (OPD).
•
Always have a new propane cylinder properly purged of air by
your certified propane gas dealer. Since a new cylinder is initially
filled with air, the air must first be purged before it is filled with
propane.
•
Always visually inspect the gas supply line for fraying, cracking
or rodent damage before each use of this Grill and, if necessary,
install a replacement hose and regulator obtained from the manu-
facturer prior to lighting this Grill.
• Always
place a dust cap on the cylinder valve outlet whenever
the cylinder is not in use and always install the dust cap that was
provided with the cylinder valve. The use of an incorrect dust cap
could result in leakage of propane.
30006292
Check hose for breaks or wear
before each use.
Type 1 Connector
Figure 3
Collar
Safety
To Main Burner
Manifold
Figure 2a
Quick Connect for Reg-
ular Side Burner and
Optional Side Burner of
Built-in Models
Regulator
Shutoff Valve
B232
B125
9