Table of Contents
Advertisement
Installation Procedure
Step 16 Optional: Power improvement mode
The power improvement mode has the following power reduction effects.
• Reduced power at Thermo off
When the air conditioner operates in Cool, Dry and Auto mode, if Thermo off is reached during cooling, the fan
and display of the indoor unit are turned off after 5 minutes.
When you operates the remote control, the indoor unit display turns on again.
• Standby mode operation
When all indoor units are turned off, the air conditioner recognizes it and enters the standby mode.
The product power consumption in the standby mode is 3.5 W or less.
Setting the power improvement mode
Enable or disable the power improvement mode with the DIP switch on the HUB PBA in the outdoor unit.
Power improvement mode
Disabled
Enabled
• Default value: Disabled
NOTE
• This function is available only when the following indoor unit is connected and the function is enabled.
AR**MXWS****/AR**NXWS****/AR**NX*X****/AR**RXWS****/AR**RX*X****
English
36
Switch
Switch setting
ON
OFF
Advertisement
Table of Contents
