Samsung AJ100RCJ5EG Installation Manual page 34

Installation Procedure
Setting an indoor unit installation option (suitable for the condition of each installation location)
1 Check whether power is supplied or not.
When the indoor unit is not plugged in, there
should be additional power supply in the
indoor unit.
2 The panel(display ) should be connected to an indoor unit to receive option.
3 Before installing the indoor unit, assign an option to the indoor unit according to the air conditioning system plan.
The default setting of an indoor unit installation option is "02000-100000-200000-300000".
Individual control of a remote controller(SEG20) is The function that controls an indoor unit individually when
there is more than one indoor unit.
4 Set the indoor unit option by wireless remote controller.
When entering Address option, connect remote controller receiver.
Option SEG1
Explanation PAGE
Indication Details Indication
Indication and
Details
0
Option SEG7
Explanation PAGE
Indication Details Indication
Indication and
Details
1
Option SEG13
Explanation PAGE
Indication Details Indication
Indication and
Details
2
Option SEG19
Explanation PAGE
Indication Details Indication
Indication and
Details
3
• The window on/off function applies to the following unit
AR**/AJ***RB1DEG/AJ***RBNDEG
English
34
SEG2
MODE
Details
2
SEG8
Details
0
SEG14
External control
Details
0 No use
1 On/Off control
2 Off control
3 Window On/Off control1)
SEG20
Details
0
Indoor Unit
1(L)
2(N)
SEG3 SEG4
Indication Details Indication Details Indication Details Indication Details
0 0
SEG9 SEG10
Indication Details Indication Details Indication Details Indication Details
0 0
SEG15 SEG16
External control output
Indication Details Indication Details Indication Details Indication Details
0 Thermo ON
0
Operation
1
ON
SEG21 SEG22
Indication Details Indication Details Indication Details Indication Details
0 0
F2
F1
SEG5 SEG6
Central control
0 No use
0
1 Use
SEG11 SEG12
Master / Slave
0 Slave
0
1 Master
SEG17 SEG18
Buzzer
0 Use
0
1 No Use
SEG23 SEG24
0 0