Step 13 Optional: Extending The Power Cable - Samsung AC-Series-KN4*EH Installation Manual

Step 13 Optional: Extending the
power cable
1 Prepare a crimping tool and the following tools.
Tools
Crimping pliers
Connection sleeve
(mm)
Insulation tape
Contraction tube
(mm)
2 As shown in the figure, peel off the shields from the
rubber and wire of the power cable.
• Peel off 20 mm of the wire shields of the tube.
CAUTION
• For information about the power cable specifications
for indoor and outdoor units, refer to the installation
manual.
• After peeling off the tube wire, you must insert a
contraction tube.
Power cable
3 Insert both sides of core wire of the power cable into the
connection sleeve.
• Method 1: Push the core wire into the sleeve from
both sides.
• Method 2: Twist the wire cores together and push it
into the sleeve.
360_AC_Indoor_IM_AU_ENG_EN.indb 17
Spec Shape
MH-14
20xØ6.5
(HxOD)
Width 19
mm
70xØ8.0
(LxOD)
20 20 20
60
120
180
(Unit: mm)
Method 1
Connection sleeve
4 Using a crimping tool, compress the two points and flip
it over and compress another two points in the same
location.
• The compression dimension should be 8.0.
• After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
Method 1
Compress it 4 times.
5 mm
5 Wrap it with the insulation tape twice or more and
position your contraction tube in the middle of the
insulation tape.
A total of three or more layers of insulation is required.
Method 1
Insulation tape
40 mm
6 Apply heat to the contraction tube to contract it.
Contraction tube
Method 2
Connection sleeve
Compression
dimension
Method 2
Compress it 4 times.
5 mm
Method 2
Insulation tape
35 mm
17
English
2016-05-13 오후 5:01:40