Advanced PPPoE
The Advanced PPPoE screen is required in order to use multiple PPPoE sessions on the same WAN
port.
It can also be used to manually connect or disconnect a PPPoE session.
Settings – Advanced PPPoE
Select WAN Port
& Session
WAN IP Account
Figure 3-3: Advanced PPPoE
WAN Port – Selected WAN port only using PPPoE connection
PPPoE Session – ISPs can usually provide multiple floating real IPs for
PPPoE. Each WAN port can have up to eight (8) PPPoE sessions, each with
a different IP address if your WAN port is using PPPoE connectivity.
PPPoE Session MTU – The Maximum Transfer Unit for PPPoE packet data.
Leave it as default unless the ISP provides a different PPPoE packet data
size. The default MTU value is 1492 bytes.
•
User Name – Enter the PPPoE user name assigned by your ISP.
•
Password – Enter the PPPoE password assigned by your ISP.
•
Verify Password – Re-enter the PPPoE password assigned by your ISP.
Page 24