Related Manuals for Edimax es-3116p
Summary of Contents for Edimax es-3116p
- Page 2 Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic,...
- Page 3 Thank you for purchasing Edimax ES-3116P Fast Ethernet switch. This 16 ports high cost-efficiency switch complies with 10/100-Base-TX standards is the best choice for Small office / Home office users. Easy install procedures allows any computer users to setup a network environment in very short time .
- Page 4 1. Operating Environment This switching hub must be installed and operated within the limits of specified operating temperature (32-131°F) and humidity (10~95% Non-condensing). Do not place objects on top of the unit. Do not obstruct any vents at the sides of the unit. Do not position the unit near any heating source such as heater, radiator, or direct exposure to sun.
- Page 5 3. Connecting the power Connect the power adapter to the power connector on the rear panel of the unit; the green Power LED on the front panel should be lit. Trouble Shooting 1. Power LED is not lit Check if the power cord is properly connected to the external power adapter and the power outlet.
Need help?
Do you have a question about the es-3116p and is the answer not in the manual?
Questions and answers