Table of Contents
Advertisement
6-1-3 PPPoE
User Name
Password
Service Name
MAC Address
MTU
Connection Type
Idle Time Out
TTL
Enable or Disable the lifespan of data in the network.
Input the User Name assigned by your ISP.
Input the Password assigned by your ISP.
Input the Service Name assigned by your ISP.
Input the MAC address of your computer here, if your ISP only permits
computer with certain MAC address to access internet. If you're using the
computer which used to connect to Internet via cable modem, you can
simply press 'Clone Mac address' button to fill the MAC address field with
the MAC address of your computer. The default value:"000000000000"
means to skip the clone.
Input the MTU (maximum transmission unit
connection here. If you don't know, you can use default value: 1392.
Normally, the MTU of ADSL is 1492.
Please select the connection type of Internet connection you wish
to use. There are 3 options:
"Continuous": keep internet connection alive, do not disconnect.
"Connect on Demand": only connects to Internet when there's a
connect attempt,
"Manual": connect to Internet only when 'Connect' button on this
page is pressed, and disconnects when 'Disconnect button is pressed.
If you choose"Connect on Demand" as your connection type, here
you may specify the time to shutdown internet connection after no
internet activity is detected.
)
value of your network
35
Advertisement
Table of Contents
