Acer Altos easyStore M2 User Manual page 162

140
Modifying the Active Directory properties
If your storage system is currently in Active Directory authentication
mode, Active Directory Properties displays in the left pane when you
click Users in the navigation bar. Click Active Directory Properties to
change the IP address of your primary or secondary Active Directory
server, or the user name or password for browsing the Active Directory
tree.
To modify the Active Directory properties:
1 In the navigation bar, click Users.
2 In the left pane, click Authentication Directory Properties.
This item displays only if you are currently using Active Directory
authentication mode. To determine which mode you are currently
using, click Authentication Mode in the left pane and observe the
mode specified in the right pane.
When you click Authentication Directory Properties, the Update
Authentication Mode page displays.
3 Make the desired changes, if any, and click Apply:
To change this
The IP address of the
primary Active
Directory server
The IP address of the
secondary Active
Directory server
4 Managing the storage system
Do this
In the Primary server IP address text box, enter
the IP address of your primary Active Directory
server. (You cannot use the server's name.)
Note: The new server must reside in the same
domain as the original server. To change
domains, you must switch back to local
authentication mode and then switch to
Active Directory authentication mode again
(as described in "Changing the authentication
mode" on page 137).
In the Secondary server IP address text box,
enter the IP address of your secondary Active
Directory server. (You cannot use the server's
name.)
Note: The secondary server must reside in the
same domain as the primary server.