Advertisement
H
O
DECONTAMINATION
2
2
13. On the H
O
Decontamination Step2 screen,
2
2
press OK key to lead the H
Step3 screen and H
H
O
decontamination is performed automatically
2
2
from Step3 to Step8 (procedure 14).
Note:
・The outer door is locked with electric lock for
safety until completion of H
・ Buzzer sounds when H
completed (About 100 minutes later).
CAUTION
The electric lock will remain locked if power supply is cut off during H
supply is recovers, the H
the decontamination again because the decontamination is not completed.
WARNING
Do not use the unlock key to unlock the outer door during H
gas resolve by UV. Doing so may cause harm to health from H
● Step3 is the process to warm the chamber
o
temperature to 45
C.
Note: By pressing Abort key, H
is stopped in the middle of decontamination and go
to Step8 (The End of H
●Step4 is the process to decontaminate in the
chamber by generating H
generator.
Note: By pressing Abort key, H
is stopped in the middle of decontamination and go
to Step7 (The process to resolve H
lamp). It is not possible to skip Step7.
64
O
Decontamination
2
2
O
decontamination is started.
2
2
O
decontamination.
2
2
O
decontamination is
2
2
O
gas resolution process will start execution and finish automatically. Execute
2
2
O
decontamination
2
2
O
decontamination).
2
2
O
vapor from H
2
2
O
decontamination
2
2
O
vapor by UV
2
2
O
decontamination. After the power
2
2
O
decontamination or during H
2
2
O
gas leakage.
2
2
O
2
2
O
2
2
Advertisement
