Advertisement
BASIC OPERATION ON LCD TOUCH PANEL
Note: On the Tools #1 screen, by mistakenly
pressing Temp./CO
Calibration screen is displayed.
When this screen is displayed, press Back key to
return to the Tools #1 screen, or press Top key to
return to the Top screen.
When these settings on this screen are changed,
inaccurate temperature or CO
displayed.
●Operation from other than Menu key
◆Unlock key*
◆Buzzer key: (Operate) Silencing the buzzer (Alarm is not canceled except for some alarms; page 79)
*5: Under any of the following conditions only.
・When an H
O
generator MCO-HP is installed in the MCO-170AICUVH.
2
2
・When all H
O
generator MCO-HP, H
2
2
MCO-170AICUV.
・When all UV system set MCO-170UVS, H
electric lock MCO-170EL in the MCO-170AIC.
*6: For the MCO-170AICUVH or an optional electric lock MCO-170EL is installed, when the auto lock
function is ON.
30
Calibration key, Temp./CO
2
density may be
2
gas supply line select key: (Operate) Manual changeover
◆CO
2
◆H
O
2
2
6
: (Operate) Unlock the outer door. (Page 67～69)
O
decon board MCO-170HB and electric lock MCO-170EL in the
2
2
O
2
2
between CO
gas supply line A and B (Page 73)
2
◆Message select key:
5
key*
: (Operate) H
O
decontamination (Page 61～66)
2
2
generator MCO-HP, H
O
2
2
(Operate) Changing some messages
decon board MCO-170HB and
2
Advertisement
