Whole House Water Filter Installation - Pentair WF4-P Manual

WHOLE HOUSE WATER FILTER INSTALLATION

Wall
1. Level the Whole House Water Filter.
Notice
Incoming
Water
If the tank is not level, lift the tank straight up 6 inches and tap it on the ground until the tank stands
Supply
vertical. The bottom of the tank is round and the boot allows the tank to stand upright.
Chemincal
Sediment Filter
Pump Tubing
Wall
Solution Tank
Incoming
Water
Top View
Supply
Sediment Filter
2. Determine the size and material of your incoming water supply line and choose the appropriate plumbing required to adapt
to the 1" male NPT Assembly.
Note
Injection Pump
Visit Pentair.com to view our full line of installation kits.
CAUTION
Do not over-tighten any of the fittings during installation.
Note: The fitting below is designed with a ¼" give to allow for proper pipe alignment. It will not leak and is intended to
have some flexibility.
Part Description
1" Plastic Male NPT Assembly:
V3007-04 WS1 Fitting 1" Plastic Male
NPT Assembly (2): O-Rings (2),
Split Rings (2), and Connectors (2)
3. Install the fittings into the INLET and OUTLET sides of the bypass valve. Follow the diagram supplied with the fitting.
4. Connect the incoming water supply to the fitting on the INLET side of the bypass valve.
5. Connect the outgoing water supply to the OUTLET side of the bypass valve.
Front View
Injector
Top View
Sediment Filter
Solution
Tank
Chemincal Injector
Pump
Drain Line
Barb
Whole House
Iron & Manganese Filter
Whole House
Iron
Filter
Manganese
Filter
Bypass
Split Ring
Qty.
2
Iron
Manganese
Filter
Wall
Spigot
Outgoing
Water to
House
Whole House
Water Filter
Water
Softener
Alternative
Quick Connect Nut
O-Ring
Water
Water
Softener
Filter
Alternative
IRON & MANGANESE FILTER SYSTEM COMBO
Wall
Outgoing
Water to
House
Water to Home
• 11