USING THE STAND MIXER
LIFTING/LOWERING THE MOTOR HEAD
To lift motor head: Push the locking
lever to the UNLOCK position and
1
lift the head. Once lifted, the lever
will automatically go back in LOCK
position to keep the head lifted.
NOTE: Motor head should always be in LOCK position when using the Stand Mixer.
W10863290A_01_EN_v06.indd 13
To put down motor head: Push the
locking lever to UNLOCK and gently
bring the head down. The locking
2
lever will automatically go back in
LOCK position when the head is
down. Before mixing, test lock by
attempting to raise motor head.
USING THE STAND MIXER | 13
3/30/16 11:18 AM