USING THE STAND MIXER
LIFTING/LOWERING THE MOTOR HEAD
To lift motor head: Push the locking
lever to the unlock position and lift
the head. Once lifted, the lever will
automatically go back in the lock
position to keep the head lifted.
NOTE: Motor head should always be in the lock position when using the Stand Mixer.
ATTACHING/REMOVING THE FLAT BEATER, FLEX EDGE BEATER*,
WIRE WHIP, OR DOUGH HOOK
*Included with select models only. Also available as an optional accessory.
To put down motor head: Push the
locking lever to unlock and gently
bring the head down. The locking
lever will automatically go back in
the lock position when the head is
down. Before mixing, test lock by
attempting to raise motor head.
To attach accessory: Turn speed
control to "0". Unplug Stand Mixer.
USING THE STAND MIXER | 13