Location Of Parts; Installation; Placement - Summit FS22L Instruction Manual

PLACEMENT


The freezer should not be placed in direct sunlight or close to heat sources such as
oven, grill, radiator, etc. Also avoid locations where the unit will be exposed to
moisture or can be easily splashed.

Place the unit on a firm flat surface. An uneven floor will cause vibration and noise.
Adjust leveling legs in front until freezer is level.

Good ventilation around the freezer allows heat to escape smoothly, improving
cooling efficiency and saving energy. To maintain high operating efficiency, do not
place anything on top of the freezer.

Allow at least 4 inches of space at the back and sides of the freezer, which allows
the proper air circulation to cool the compressor. This improves cooling efficiency
and saves energy. Leave at least 1¼" of space above the freezer.

Position the appliance in such a way that the plug is accessible

After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3
hours before placing food into the freezer.

LOCATION OF PARTS

INSTALLATION

1¼"
4"
4"
4
Minimum clearances for sides and top