Table of Contents
Advertisement
Quick Links
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES
AND OPERATING INSTRUCTIONS. KEEP THIS MANUAL IN A SECURE LOCATION.
Write Serial Number (on back of unit) here:
_______________________________
COMPACT FREEZER
Model No.
Instruction Manual
FS20L
Felix Storch, Inc.
770 Garrison Avenue
Bronx, New York 10474
www.summitappliance.com
Advertisement
Table of Contents
Related Manuals for Summit FS20L7CSS
Summary of Contents for Summit FS20L7CSS
- Page 1 COMPACT FREEZER FS20L Model No. Instruction Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. KEEP THIS MANUAL IN A SECURE LOCATION. Felix Storch, Inc. Write Serial Number (on back of unit) here: 770 Garrison Avenue Bronx, New York 10474 _______________________________ www.summitappliance.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Technical Information ..................1 Important Safeguards .................. 2 - 3 Location of Parts ....................4 Installation ......................4 Installation of Your Unit Electrical Connection Operation ...................... 5 - 6 Setting the Temperature Control ............... 5 Using the Freezer ..................5 Defrosting Your Unit .................. -
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS Before the freezer is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the freezer, follow basic precautions, including the following: •... - Page 4 • This unit is not designed to operate in enclosed spaces. When placing your unit, make sure you allow at least 4” of clearance on both sides, at the back and on the top. Be sure that airflow under the appliance is not obstructed. •...
-
Page 5: Location Of Parts
LOCATION OF PARTS INSTALLATION Installation of Your Unit ● Place your unit on a floor that is strong enough to support it when it is fully loaded. To level your unit, rotate the adjustable leg at the bottom. ● Allow 4 inches of clearance at the back, top and sides of the unit to allow for proper air circulation to cool the compressor and condenser. -
Page 6: Operation
OPERATION Setting the Temperature Control • The cabinet temperature is controlled by the thermostat located at the back of the unit. Rotate the dial to adjust the cabinet temperature. • To turn the freezer off, turn the temperature control to 0. •... -
Page 7: Storage
Storage • Stored items must be properly packaged. • Never store any inflammable, volatile or explosive substances. • Stored items should not touch the rear wall of the freezer. • An unpleasant odor inside the freezer is a sign that something is wrong with the stored items or that the freezer needs cleaning. -
Page 8: Cleaning And Maintenance
CARE AND MAINTENANCE Cleaning Your Unit The freezer should be cleaned and maintained at least once a month. When performing cleaning and maintenance, make absolutely sure that the power plug is first disconnected from the power outlet. • Turn the temperature control to 0, unplug the unit and remove frozen items and shelf. •... -
Page 9: Reversing The Door Swing Of The Freezer
The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, follow the directions below. If you have a problem, call SUMMIT Customer Service at 1-800-932-4267. 1) Door hinge cap ... -
Page 10: Troubleshooting
The gasket is dirty. The shelf is out of position. If your freezer shows other symptoms than those described above, or if you have checked all items listed as the cause and the problem still exists, then call SUMMIT® Customer Service at 1-800-932-4267... - Page 11 NOTES...
-
Page 12: Limited Warranty
LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company.
Need help?
Do you have a question about the FS20L7CSS and is the answer not in the manual?
Questions and answers